Water Fountain Tips

There are many ways to troubleshoot your water fountains and practically they are not hard to follow. Basically a water fountain is consisting only of the water pump, the hosing and the ornaments that make up the structure. Although different designs, styles and material can make a difference in the structures of water fountains, their physical component are nonetheless similar and this is why troubleshooting and maintaining water fountains categorically fall in similar procedures. Indoor water fountains may have sleeker and smaller designs with smaller pumps than outdoor fountains. Outdoor fountains sometimes have larger designs and therefore have bigger and more powerful components. However, both of them have related issues when it comes to troubleshooting and maintenance and this is why water fountain tips are crucial to make them function well. 

When following water fountain tips the best way to prevent future troubles is maintenance and that is the keyword. Then it is followed by observation and then the troubleshooting comes. If you can religiously make these as a habit you can be assured your water fountain will not give up on you that easy. Furthermore, here are the common maintenance and troubleshooting guidelines that could help you establish long life for your fountain.

1. In case your water fountain is new treat it just like a new car. It has a pump that encases the motor so try to go on slowly while it’s new. Turn it on for a few minutes on a low level then off then on again until those hard vibrations stabilize. Normally bubbles would come out when you do that but watch out for those bubbles till they disappear. Leave the pump running on low on the first day of plugging.
2.  When you see a dry spot where water cannot reach it guide the water to follow through. Dry spots can create inconsistent flow of water.
3. Hearing those vibrations are indications that your water level maybe very low which put pressure for the pump to work harder. Always make sure the pump is properly submerged and if those vibrating sounds are still there cut a piece of sponge much like the size of the pump and put underneath it. Sponges always come in handy when it comes to following water fountain tips because they can serve as shock absorbers for an unstabilized pump.
4. Inconsistent or unstable water flow can happen if the control valve is not adequately opened. Make sure it is always wide open. Another reason is the debris that may be clogging the filter and the impeller and this can cause disturbances in the normal flow of the water.
5. The white spots are not too much too worry about. They are just mineral spots from the hard water your hose is connected. You can clean these by using a CLR product or if you want softer water without the minerals use distilled water instead.
6. Now for the maintenance, the best water fountain tips so far are regular cleaning procedures and the use of soft water to avoid sediment build up . Constant cleaning is especially needed for garden fountains and solar water fountains that normally accumulate dirt from the environment. From time to time try to clean the whole fountain by discharging all the water including water in the pump. Clean the filter and the distribution system by removing the clogs, algae and debris that are stocked on them.
7. Odor or bad small indicates the buildup of algae or other microorganisms in the water. At least once every month try to add anti-algae or anti-white scale solution to stop the growth of such organisms.
8. Lastly, take the weather as a precaution. If you reside in an area where temperature can freeze water better take your water fountain for a break and bring it inside the house or store it till the cold season passes. Very low temperature can damage the pump and the hosing.